TAMIYA


*** Vi har även reservdelar till din personbil / USA bil ***

Hos Motorfyndet (Secu import Sweden) hittar du Tamiya RC bilar, On road, Off road Nitro och El bilar, RC Tanks (pansarvagn), RC lastbilar, släp och tillbehör. Av Tamiya plastbyggsatser har vi ett sortiment av exmpelvis militära fordon, figurer och civila bilar, motorcyklar i olika modeller och skalor.


TAMIYA är väldsledande när det gäller R/C och plastbyggsatser.

Tamiya Rc bilar och plastmodeller

Tamiya.nu R/C bilar och plastmodeller

Vill du se priser och/eller beställa ur Tamiyas sortiment hänvisar vi till Secu import Sweden
Längre ner på sidan presenterar vi några exempel från Tamiyas sortiment


Secu import Sweden har hela Tamiya sortiment. Här köper du Rc bilar, Plastmodeller och tillbehör mm. Vi har även andra märken som Acoms, Futaba och Dräger mfl


Vi säljer även följande märken av plastmodeller / byggsatser
Italeri, Hasegawa, Trumpeter, Dragon, Zvezda mfl
Ange alltid tillverkarens artikel nummer vid beställning / förfrågan som du hittar här!
Detta för att vi ska kunna ge dig ett snabbt svar på pris och om varan finns hemma för leverans!


KONTAKTA OSS


Vill du beställa eller fråga om pris till din personbil. För bästa pris, maila ditt regnr och vilken reservdel/tillbehör det gäller.



Lista utförsäljning klick här



Några exempel från Tamiyas sortiment. RC= radio controlled

PORSCHE TURBO RSR 434 - T05 TAM 49400
Ord. pris 5799:- för aktuellt pris gå till Secu import Sweden
KLICKA HÄR FÖR MER INFO OCH BILDER

Tractor Truck Scania R470 - Highline Metallic Special TAM-56321



The Tamiya Scania Tractor truck is now available with a chrome metallic body. All the same great features as the original come included with this new kit.

Click here to see how the 3Speed transmission works on this vehicle.

Specs & Features
  • Length: 452mm, Width: 187mm, Height: 293mm, Wheelbase 272mm.
  • The motor and transmission are in the frontal part of the chassis which has a metal ladder frame and it drives just like the real thing.
  • Has a metal leaf spring suspension.
  • 4 channel transmitter not included.

    SEMI-TRUCK KITS REQUIRE:
BMW Z4 M Coupe Racing - TT01 w/LED Lights TAM-58393


The BMW Z4 first made its debut in 2002 as the replacement for the earlier Z3 roadster. A few years later, the coupe version was unveiled, and it wasn't long before BMW's M Division went to work turning it into a full-fledged racing car. The result was the stylish BMW Z4 M Coupe Racing, which Tamiya now brings to you as the newest addition to our ever-expanding lineup of electric R/C cars on the reliable TT-01 chassis

About the Model
  • Lightweight and user-friendly TT-01 chassis modified by reversing rear suspension arms to create the shorter wheelbase (251mm) for greater scale accuracy.
  • 4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
  • All-new body shell accurately recreates the sleek lines of the Z4 M Coupe race car and is made from durable polycarbonate.
  • Markings and painting instructions included to depict the car in BMW Motorsport works livery.
  • Includes electronic speed controller (TEU-101 BK) and type 540 motor.
  • Includes LEDs for head and tail lights that turn on automatically when the car is switched on.
  • Metal-plated light fixtures enhance the realistic appearance of the LEDs.
  • Add the TLU-02 Light Control Unit (ITEM 53937) for greater control of light operations.
  • Wide variety of tune-up parts are separately available to customize your machine.
RTR Nissan GT-R - TT-01E TAM-57779
RTR = Ready To Run



Expert bygd modell - med sändare. Måste kompletteras med batteri och laddare

The aerodynamic form of the beautiful Nissan GT-R has been precisely reproduced with its lightweight polycarbonate body being mounted on the equally impressive TT-01 Type-E chassis. LED lights depict realistic head and tail lights.

  • The lightweight polycarbonate body precisely captures the beautiful lines of the GT-R-Racing Slicks (Item 50419) provide excellent traction for high speed racing.
  • Stylish Nissan GT-R Wheels accurately reproduced.
  • Type 540 motor installed on the impressive shaft-driven 4WD TT-01Type-E chassis.
  • Improved steering linkage design features TA05 steering posts for sharper steering re-sponse.
  • Equipped with LED Light Unit TLU-01. *It is possible to assemble with LED Light Control Unit TLU-02 (sold separately).
  • 2 white and 2 red 5mm LED lights (total 4) are included.
  • Both front & rear light cases have two 5mm and four 3mm LED Light installation points.-Comes in PS-23 Gun Metal color.
  • ESC and Expec 2-channel R/C system included.
  • Running 7.2V battery & charger separately required.
  • Wide variety of Option Parts are separately available to customize your machine.
RTR Mercedes AMG DTM 2008 - TT01E C Class Original TAM-57791
RTR = Ready To Run



Expert bygd modell - med sändare. Måste kompletteras med batteri och laddare

Featuring throughout the 2008 DTM (German Touring Car Masters) season was the impressive No.6 Mercedes C Class entrant with famed driver Bernd Schneider at the helm.The car proved to be a highly competitive machine and went on to win first place at Round7 Nurburgring in Germany and third place at Round 9 Circuit de Catalunya in Spain.

  • 1/10 Ready-to-Run R/C model of the 2008 C Class Mercedes AMG DTM.
  • Polycarbonate body captures the aggressive form of the Mercedes.
  • The eye-catching silver livery is the same color used by the Original Teile race car.
  • The improved steering linkage design features TA05 steering posts for sharper steering response.
  • Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling.
  • Equipped with LED Light Unit TLU-01. *It is also possible to install LED Light Control Unit TLU-02 (sold separately).
  • 2 white and 2 red 5mm LED lights (Total 4) are included.
  • Both front and rear light cases have two 5mm and four 3mm LED Light installation points.
  • Includes ESC, type 540 motor, and 2-channel R/C system.
  • Battery pack and charger separately required.
  • A wide variety of Option Parts are separately available to further customize your machine.


RC Tractor Truck Scania R620 - 6x4 Highline TAM-56323



Trucks are essential components of many logistics networks around the world. One such truck which can be seen on the roads carrying large loads is the biggest and most powerful Scania truck, the R620. Tamiya is proud to add this wonderful piece of machinery the R620 6x4 to the 1/14 scale R/C Tractor Truck lineup. This massive tractor truck features 3-axle and is approximately 458mm long. Beautifully reproduced cabin tilts forward separately from the fenders, just like the actual truck. The accurately modeled fenders themselves are removable for realistically depicting a low carrying load. Realistic chassis and suspension further add to the imposing form of this unique model.

About the Model
  • LEDs accurately recreate the trucks front and rear lights.
  • Attach the Multi Function Control Unit (MFC-01, not included) to provide sound effects such as attaching/detaching any of the currently available trailers, as well as other easily distinguishable truck sounds.
  • 3-Speed Transmission allows gear shifting to be controlled during driving for added realism.
  • Metal leaf spring suspension.
  • Cabin tilts forward just like the full-sized truck.
  • Type RS540 motor included.
  • ESC, 4-channel transmitter, battery pack & charger not included.
  • Also compatible with a wide range of Tractor Truck Option Parts for further customization.

    SEMI-TRUCK KITS REQUIRE:
    (unless stated differently above)
    • Radio: 4-Channel with servo(s)
    • Battery: 6-cell flat with standard Tamiya connector
    • Charger: AC/DC timed or peak for 6-cell battery
    • Paint: Polycarbonate for spare body
    • Misc. Items: Building and track equipment
Plastmodeller "exempel"


TAMIYA TAM-12029 FW 14B WILLIAMS Skala 1/12


TAMIYA TAM-12031 MINI COOPER 1,3i skala 1/12



TAMIYA 12040 934 JAEGER w/PE PARTS skala 1/12

RC Toyota Tundra Highlift - 4x4-3SPD TAM-58415


Klicka här för mer info och bilder

In February 2007, after a full model change, Toyota released a full-sized American pick-up truck. It was the first time in Toyota's history that an "All American Made" pick-up truck was sold. With the rising crude oil prices and the increasing demand for economical Japanese cars, the sales of the Tundra in the Pick-Up truck market was quite strong. This model precisely shows off the Tundra's modern looks and its great ability to take on any terrain with its excellent drive system. Tamiya's truck model of the Tundra comes as an accurately reproduced Double Cab version. Furthermore, this model Tundra comes with option parts allowing the user to raise the body in the same manner as the actual pick-up truck.

  • The durable ladder frame chassis features steel channels and resin cross members for high strength.
  • Equipped amidships for a lower center of gravity is a 3-speed transmission allowing gear changing and realistic low speed driving.
  • Propeller shafts and slipper clutch efficiently transfer power to all wheels on any type ofterrain.
  • Powered by a type 540 motor. (included)
  • The full-time 4WD guarantees road hugging performance.
  • The differential can be locked in place to enable improved performance on any surface it may face.
  • The newly designed chrome plated wheels with bead lock rings precisely catch the essence of the Pick-up truck. Because the Tundra is fitted with similar side-block tires like the F-350 (58372) and Hilux (58397), it is possible to change them with any other cross country tires.
  • 4-Channel transmitter, ESC, and running battery & charger are separately available.
  • Use TS Sprays to paint your Tundra the desired color
  • Loading the separately available Pick-Up Truck Multi-Function Unit (Item 53957) MFC-02 will further enhance the truck and put a wide range of realistic light, sound, and vibration effects at your fingertips.
  • For dressing-up the model, snow boards (2) and roof racks are included.
  • This unit requires at least a three channel radio in order to shift transmission (If MFU is installed four channel radio is required).

    Updated info
  • Wheelbase 12 1/4"
  • Chassis Length 17 1/4"
  • Body Length 18 1/4" (Bumper to Bumper)
  • distance from top of tire to top of wheel well 1 1/2"
  • Snowboards 6 1/4" x 1 1/4"

    ELECTRIC KITS REQUIRE:
    (unless stated differently above)
    • Radio: 2-Channel with servo(s)
    • Battery: 6-cell flat with standard Tamiya connector
    • Charger: AC/DC timed or peak for 6-cell battery
    • Paint: PS for Polycarbonate/TS for ABS
    • Misc. Items: Building and track equipment


RC Lamborghini Countach LP500S - TT01E TAM-58413

At the 1971 Geneva Motor Show, the Lamborghini Countach prototype was put on show.Three years later in 1974, Lamborghini released the first LP400 model Countach with theLP400S the LP500S models soon following. At the 1982 Geneva Motor Show both theLP400S and LP500S prototypes were showing off their overhanging front and rear fend-ers and a rear wing option. In 1985, approximately 320 of these vehicles sporting a new4754cc motor replacing the previous 3929cc motor were manufactured.

  • New polycarbonate body captures the beautiful form of the Countach.
  • Mirror, rear wing, and metal plated light case are separately-molded parts.
  • Head lights are in the down position (Can not pop up)
  • Type 540 motor installed on the impressive shaft-driven 4WD TT-01 (Type-E)-Improved steering linkage design features TA05 steering posts for sharper steering re-sponse.-Short wheel base (251mm), Rear wide tread (Uses long wheel axle).
  • Countach LP500S (TT-01E) wheels. Front offset [+2] Rear offset [+4].
  • Racing Slicks (Item 50419) provide excellent traction for high speed racing.
  • LED Lights: Fog lights (5mm white) x 2, Taillights (5mm Red) x 2 are included.-Both front & rear light cases have two 5mm and four 3mm LED Light installation points.
  • 2-channel R/C system, 7.2V battery and charger separately required.
  • Wide variety of Option Parts are separately available to customize your machine.

    ELECTRIC KITS REQUIRE:
    (unless stated differently above)
    • Radio: 2-Channel with servo(s)
    • Battery: 6-cell flat with standard Tamiya connector
    • Charger: AC/DC timed or peak for 6-cell battery
    • Paint: PS for Polycarbonate/TS for ABS
    • Misc. Items: Building and track equipment
RC Multi-Function Control Unit - Pick-Up Truck (MFC-02) TAM-53957



Klicka här för mer info och bilder

Released in 2006, the 1/10 R/C 4x4 3-Speed High-Lift has been exceptionally well-received by fans around the world. With the release of this new Multi-Function Unit, Tamiya kicks up the realism another notch with light, sound, and vibration effects all controllable via a 4-channel transmitter (sold separately) to make all the 3-Speed Highlifts even more impressive!!!
RC Super Clod Buster Kit - Metal Plated Special TAM-58423


This famous monster truck now comes in a special edition that features a brilliant metal plated body. The Super Clod Buster features a twin-motor dual gearbox 4WD drive train, a durable link-arm, 8 coil springs and massive 165mm dia. tires for powerful and efficient performance to overrun any obstacle

  • Twin-motor dual gearbox 4WD drive train
  • A durable link-arm and 8 coil springs support the massive 165mm dia. tires
  • Also features a load of metal plated detail parts including front grill, air-intake, roll bar, wheels and front and rear bumpers.
  • Motor and Electronic Speed Controller included.
  • Includes PTC safety switch to reduce possibility of overheating.
  • Resistor comes pre-assembled.
  • 2-channel R/C system, 7.2V battery and charger separately required.

ELECTRIC KITS REQUIRE:
(unless stated differently above)
  • Radio: 2-Channel with servo(s)
  • Battery: 6-cell flat with standard Tamiya connector
  • Charger: AC/DC timed or peak for 6-cell battery
  • Paint: PS for Polycarbonate/TS for ABS
  • Misc. Items: Building and track equipment

RC Mercedes-Benz Unimog 406 - CR01 Series U900 TAM-58414



About the Model
    • The Mercedes-Benz Unimog's body is made from lightweight polycarbonate material.
    • CR-01 chassis features a heavy-duty ladder frame with strong lightweight pressed aluminum channels and cross channels.
    • 4 link coil suspension provides the flexibility needed to conquer difficult rocky terrain.
    • Center gearbox features planetary gears with a compact design enabling the battery to be mounted lower for a better center of gravity.
    • Newly designed 3-piece beadlock wheels mounted with massive 125mm diameter and 56mm wide rock crawler tires are ready for any terrain.
    • Powered by a 540 motor.
    • Can be fitted with Yellow (Front) and Red (Rear) TLU-01 LED Lights (ITEM 53909)
    • The Unimog is compatible with a wide range of Option Parts

      ELECTRIC KITS REQUIRE:
      (unless stated differently above)
      • Radio: 2-Channel with servo(s)
      • Battery: 6-cell flat with standard Tamiya connector
      • Charger: AC/DC timed or peak for 6-cell battery
      • Paint: PS for Polycarbonate/TS for ABS
      • Misc. Items: Building and track equipment

RC TAMIYA RC GP RTR TNX 5.2R - TGM04 4x4 Custom Monster Truck Artnr: TAM-43530 RTR = READY TO RUN / Klar att köra



       Since its introduction in June 2004, the TNX has dominated the U.S. R/C racing truck scene with a series of impressive wins, including Monster Madness and the Pro-Line Nitro Maxx Challenge. We now proudly announce our next generation Ready-to-Run nitro monster truck: the TNX 5.2R which is designed to continue this victorious trend with even greater top speeds and performance.

       The new TNX engine features a rear exhaust pipe for bursts of power, pushing this R/C Monster truck to the front of the pack with explosive acceleration and extreme top speeds. The high performance 5.2cc .32 (cubic inch) engine features a slide valve carburetor for optimum response. The New TGM-04 chassis features a 2-speed transmission for reliable shifting and ball pivot suspension equipped with 4 large capacity oil dampers for excellent handling and stability. The Ultra tough chassis frame features reinforced and heavy-duty parts built to take on all kinds of terrain. Steel drive shafts provide improved durability and excellent performance, without adding unnecessary weight. Fully-equipped weight of the new TNX is drastically reduced, weighing in at 4,300g. This is a full 100g lighter than the original TNX, and compares favorably with most 1/10 scale monster trucks. 

Klicka här för mer info. och Filmer

About the model
  • 1/8 Ready-To-Run R/C Glow Engine Monster Truck on a shaft driven 4WD TGM-04 Chassis.
  • Lightweight and compact TRU-03 Receiver features failsafe function to prevent runaway driving caused by radio interference or low battery power.
  • Comes with external electric Tamiya Handy Starter with drive gear unit and plug heater.
  • Wheel/trigger type transmitter included.
  • Features newly developed high-density, oval spike tires and dish wheels.
  • Ball pivot type 4 wheel double wishbone suspension features 4 large capacity oil dampers.
  • Features 2-speed transmission with metal spur gear and slipper clutch for heightened durability.
  • Powerful 5.2cc (.32 cubic inch) FR-32FX engine with slide valve carburetor.
  • A total of 26 ball bearings used to ensure smooth and efficient movement.
  • Reinforced steel drive shafts.
  • AA & C Batteries, engine fuel are separately required to operate truck.
  • Tune-up truck with Tamiya Option Parts. Add separately available oil dampers and springs to attach a total of 8 dampers. Other option parts such as brake arm & disc, suspension mount & hex wheel hub will further upgrade and improve performance.

RTR NITRO XB KITS REQUIRE:
(unless stated differently above)
  • Battery: 4AA for Receiver 8AA for Transmitter
  • Fuel: Nitro Glow Fuel
  • Starting Equipment: Glow igniter
  • Misc. Items: Building and track equipment


Porsche Turbo RSR Type 934 TAM-49400 Limited Edition



Length: 435mm (Image shows finished and painted assembly kit)
1/10 Scale Radio Control Car

詳細写真 Tamiya RC 30th Anniversary This year marks the 30th Anniversary of Tamiya's entry into the R/C market. To commemorate this milestone, we proudly announce a limited release of an updated version of our first R/C Car, the classic Porsche Turbo RSR Type 934, the model that marked Tamiya's debut as a leader in the R/C world. Incorportating lessons learned from our IFMAR World Championship triumphs, the unique lightweight chassis features a tough carbon fiber double deck with a 230mm wheelbase and aluminum front and rear bulkheads. The high-performance drivetrain features 2-belt driven 4WD system with compact motor mount and front and rear ball differentials for maximum efficiency. Lightweight polycarbonate body precisely replicates the curves of the Porsche body, with ready to assemble side mirrors and wing plus metal-plated light enclosures adding extra detail. For the ultimate finish, LEDs (sold separately) can be installed to give this car the most realistic appearance possible.

A Brief Background of the Porsche Turbo RSR Type 934 Based on the Porsche 930 introduced in 1975, the Turbo RSR Type 934 was developed to compete in the Group 4 GT category of FIA races. Equipped with a tuned 2994cc flat-six turbo engine cranking out 485 horsepower and 62 kg/m of torque, the car came to dominate the production car racing scene throughout the world during the 1970s in the hands of many private racing teams and had many impressive performances, including a 2nd place finish at Le Mans 24 Hours. This assembly kit is a model of the machine that was sponsored by the German heating technology company Vaillant.

 Kit Features


Front Section
・Aluminum steering wiper for optimum Ackerman angle
・Ball differential (equipped at both front and rear) for stable running


Rear Section
Newly designed lightweight aluminum bulkheads (equipped at both front and rear)


Motor Mount & Center Pulley
Slim yet strong motor mount means less weight. Note the special "RC 30th Anniversary since 1976" mark stamped on the upper deck.



Body, Wing, and Lights
・Durable and lightweight polycarbonate body shell features perfectly replicates the actual car. Use PS-54 Cobalt Green (sold separately) for a beautiful realistic finish.

・Rear wing and side mirrors come ready to be attached to the body.

・Front and rear metal-plated light enclosures can be fitted with LEDs and the TLU-01 LED Light Unit (both sold separately) for realistic light action.




Wheels
Metal-plated medium-narrow wheels are fitted with racing radial tires. Rear tires realistically feature a wider tread.
| |



Med reservation för text fel.